ADG702LBRM-REEL Overview

As the electronic part is packed in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, 8 terminations have occurred. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. This electronic part can be found in the 8 series. SPST - NC switching circuits are used in these analog switch ics. Try searching for the analog switch ic with ADG702 if you are looking for variants. There is 3Ohm internal resistance in this digital multiplexer. The datasheets for the 8 pins explain the functions. This switch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. There should be 1.8V voltage fed to the electrical part below 1.8V. The voltage required by this switch device is 1.8V~5V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1pA. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them.

ADG702LBRM-REEL Features

1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 200MHz

ADG702LBRM-REEL Applications

There are a lot of Analog Devices Inc. ADG702LBRM-REEL Analog Switches & Multiplexers ICs applications.

• Digital Cross-Connects
• Cross Connects
• PBXs
• New designs requiring multiplexer functions
• Communications systems
• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Sample-and-hold systems
• Power routing
• Medical systems
• Signal routing between systems