Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG715BRUZ

  • ADG715BRUZ
  • ADG715BRUZ

ADG715BRUZ

ADG715BRUZ

Analog Devices Inc.

20ns, 8ns (Typ) SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG715 24 Pins 100pA 2.5V 24-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG715BRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 4 weeks ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 24-TSSOP (0.173, 4.40mm Width)
Surface Mount YES
Number of Pins 24
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 24
ECCN Code EAR99
Resistance 4.5Ohm
Additional Feature ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 125μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 8
Supply Voltage 2.5V
Terminal Pitch 0.65mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number ADG715
Pin Count 24
Power Supplies 3/5/+-3V
Number of Channels 8
Interface Serial
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Operating Supply Current 10μA
Nominal Supply Current 20μA
Power Dissipation 125μW
Max Supply Current 20μA
Throw Configuration SPST
Turn On Delay Time 140 ns
Voltage - Supply, Single/Dual (±) 2.7V~5.5V ±2.5V
Supply Type Dual, Single
Bandwidth 155MHz
Neg Supply Voltage-Nom (Vsup) -2.5V
Turn-Off Delay Time 130 ns
Max Dual Supply Voltage 2.75V
On-State Resistance (Max) 4.5Ohm
Min Dual Supply Voltage 2.25V
High Level Output Current 30mA
Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 1:1
Off-state Isolation-Nom 60 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 11pF 11pF
On-state Resistance Match-Nom 0.4Ohm
Switch Circuit SPST - NO
Switch Time (Ton, Toff) (Max) 20ns, 8ns (Typ)
Charge Injection 3pC
Crosstalk -90dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Switch-on Time-Max 200ns
Switch-off Time-Max 190ns
Drain to Source Resistance 2.5Ohm
Normal Position NC
Height 1.05mm
Length 7.8mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $6.71000 $6.71
500 $6.6429 $3321.45
1000 $6.5758 $6575.8
1500 $6.5087 $9763.05
2000 $6.4416 $12883.2
2500 $6.3745 $15936.25
ADG715BRUZ Product Details

ADG715BRUZ Overview


This electronic part is conveniently packaged in 24-TSSOP (0.173, 4.40mm Width), making it easy to ship abroad. This high-reliability packaging method uses advanced packaging methods Tube. A switch device like this is mounted in Surface Mount. 1:1 is the ratio of multiplexer to demultiplexer circuits. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there have been 24 terminations. A 8 channel electronic part produces high-quality output. A 2.5V voltage supply should turn on and run the electronic component. An injection of 24 pins is performed into the body of the electrical component. Unlike digital switches, these are based on SPST - NO switching circuits. Try searching for ADG715 variants of the analog switch ic. Analog switches have 4.5Ohm internal resistance. To find out what the 24 pins do, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 5.5V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2.7V voltage fed to the electrical part below 2.7V. It would be sufficient to run this analogue multiplexer with 10μA current. The switch multiplexer may be damaged if it is exposed to voltage greater than 20μA. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 2.75V. The voltage should be at least 2.25V if you are using dual power supplies. In 155MHz-bandwidths, data can be transferred. This electronic part has additional features, such as: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY. Resistivity from Drain to Source is 2.5Ohm for this electronic part.

ADG715BRUZ Features


8 Channels
Switch Circuit: SPST - NO
10μA Supply Current
Bandwidth: 155MHz
Additional Features: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 2.5Ohm


ADG715BRUZ Applications


There are a lot of Analog Devices Inc.
ADG715BRUZ Analog Switches & Multiplexers ICs applications.


  • Ultrasound
  • Audio and video switching
  • Automatic test equipment
  • Precision data acquisition
  • Battery-powered systems
  • Sample-and-hold systems
  • Communication systems
  • Data Acquisition Systems
  • Relay Replacement
  • Battery Powered Systems

Related Part Number

DG411DVZ
Renesas Electronics America Inc.
DG411DVZ
$0 $/piece
MAX4521CPE
Rochester Electronics, LLC
MAX4521CPE
$0 $/piece
74LVC2G66DP-Q100H
Nexperia USA Inc.
74LVC2G66DP-Q100H
$0 $/piece
74HCT4051BQ-Q100,1
Nexperia USA Inc.
74HCT4051BQ-Q100,1
$0 $/piece
MAX4677EUE+
Maxim Integrated
MAX4677EUE+
$0 $/piece
DG1411EEN-T1-GE4
Vishay Siliconix
DG1411EEN-T1-GE4
$0 $/piece
ADG1334BRSZ-REEL
Analog Devices Inc.
ADG1334BRSZ-REEL
$0 $/piece
MM74HC4066MTCX
Rochester Electronics, LLC
MM74HC4066MTCX
$0 $/piece
MAX4602CPE
Rochester Electronics, LLC
MAX4602CPE
$0 $/piece
ISL43640IUZ-T
Renesas Electronics America Inc.
ISL43640IUZ-T
$0 $/piece
view all related

Get Subscriber

Enter Your Email Address, Get the Latest News