ADG729BRU-REEL7 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 4 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. Into the electrical component body are injected 16 pins. Circuits based on SP4T switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Using the ADG729 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 4.5Ohm. To find out what the 16 pins do, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexers or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. Using a single voltage supply, this switch device consumes 2.7V~5.5V volts. The switch multiplexer may be damaged if it is exposed to voltage greater than 20μA. An analog IC with the number AUDIO/VIDEO SWITCH is integrated into this board. The 8 inputs need to be operated in order to work. It can conduct in a 4-bit manner.

ADG729BRU-REEL7 Features

4 Channels
Switch Circuit: SP4T
-3db Bandwidth: 100MHz
4-Bit

ADG729BRU-REEL7 Applications

There are a lot of Analog Devices Inc. ADG729BRU-REEL7 Analog Switches & Multiplexers ICs applications.

• Audio signal routing
• Avionics
• SONET/SDH ADM
• PBX interfaces
• Cross Connects
• Transmit
• Relay Replacement
• RGB switches
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• HDTV