Welcome to Hotenda.com Online Store!

logo
userjoin
Home

ADG733BRUZ

ADG733BRUZ

ADG733BRUZ

Analog Devices Inc.

21ns, 10ns (Typ) SPDT 4.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG733 16 Pins 100pA 2.5V 16-TSSOP (0.173, 4.40mm Width)

SOT-23

ADG733BRUZ Datasheet

non-compliant

In-Stock: 0 items
Specifications
Name Value
Type Parameter
Factory Lead Time 8 Weeks
Lifecycle Status PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e3
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Resistance 4.5Ohm
Additional Feature ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
Subcategory Multiplexer or Switches
Max Power Dissipation 5μW
Technology CMOS
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 3
Supply Voltage 2.5V
[email protected] Reflow Temperature-Max (s) 40
Base Part Number ADG733
Pin Count 16
Number of Outputs 6
Number of Channels 3
Interface Parallel
Max Supply Voltage 5.5V
Min Supply Voltage 1.8V
Test Frequency 1MHz
Operating Supply Current 1nA
Nominal Supply Current 1μA
Power Dissipation 5μW
Max Supply Current 1μA
Turn On Delay Time 34 ns
Voltage - Supply, Single/Dual (±) 1.8V~5.5V ±2.5V
Supply Type Dual, Single
Bandwidth 160MHz
Neg Supply Voltage-Nom (Vsup) -2.5V
Turn-Off Delay Time 12 ns
Max Dual Supply Voltage 2.75V
-3db Bandwidth 200MHz
On-State Resistance (Max) 4.5Ohm
Min Dual Supply Voltage 2.25V
High Level Output Current 30mA
Dual Supply Voltage 2.5V
Multiplexer/Demultiplexer Circuit 2:1
Off-state Isolation-Nom 72 dB
Current - Leakage (IS(off)) (Max) 100pA
Channel Capacitance (CS(off), CD(off)) 11pF
On-state Resistance Match-Nom 0.1Ohm
Switch Circuit SPDT
Switch Time (Ton, Toff) (Max) 21ns, 10ns (Typ)
Charge Injection 5pC
Crosstalk -67dB @ 1MHz
Switching BREAK-BEFORE-MAKE
Drain to Source Resistance 4.5Ohm
Height 1.05mm
Length 5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Pricing & Ordering
Quantity Unit Price Ext. Price
1 $3.85000 $3.85
96 $3.27240 $314.1504
192 $2.83609 $544.52928
576 $2.41431 $1390.64256
1,056 $2.03616 $2.03616
ADG733BRUZ Product Details

ADG733BRUZ Overview


The electronic component is convenient to ship overseas because it is packed in a 16-TSSOP (0.173, 4.40mm Width). This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. In total, there have been 16 terminations. A 3 channel electronic part produces high-quality output. An 2.5V voltage supply should allow the electrical part to be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPDT switching circuits. Try searching for ADG733 variants of the analog switch ic. An switch multiplexer with 4.5Ohm internal resistance has a value of 4.5Ohm. Datasheets for functions of 16 pins are available. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Analogue multiplexer with a Dual, Single supply type that is cost-effective. There should be 1.8V voltage fed to the electrical part below 1.8V. For this multiplexer to operate, 1nA current would be sufficient. If put voltage greater than 1μA on the device, damage may be caused to the analogue multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 2.75V. With dual power supplies, you should attach at least 2.25V. The data can be transferred over a wide range of bandwidths, called 160MHz bandwidths. Additional features of the electronic component include: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY. There is 4.5Ohm resistance between the Drain and Source on this part. Multiplexer ics with 6 outputs are available.

ADG733BRUZ Features


3 Channels
Switch Circuit: SPDT
1nA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 160MHz
Additional Features: ALSO OPERATES WITH 1.8V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 4.5Ohm

ADG733BRUZ Applications


There are a lot of Analog Devices Inc. ADG733BRUZ Analog Switches & Multiplexers ICs applications.

  • Precision data acquisition
  • Communication systems
  • SONET
  • Channel Banks
  • CSU
  • Avionics and Military Systems
  • PDH Multiplexers
  • Battery-powered systems
  • Battery Powered Systems
  • ADCs such as AD7840/8, AD7870/1/2/4/5/6/8

Related Part Number

Get Subscriber

Enter Your Email Address, Get the Latest News