Presented in 16-SSOP (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. 2:1 is the number of circuits in the multiplexer and demultiplexer. Extended operating temperature around -40°C~85°C TA. There are 16 terminations totally. A high-quality output is provided by the electrical component's 2 channels. If the voltage supply is 3V volts, the electrical component should be turned on and run. There is an electrical component included in the 16 series. A SPDT switching circuit is used to build these analog multiplexers. The multiplexer consists of 4 circuits. Try searching with ADG774 to find analog multiplexer variants. There is 3.5Ohm internal resistance in this digital multiplexer. The functions of 16 pins can be found in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. A low voltage of 0V should be applied to the electronic component. An operating current of 1nA would be sufficient for this switch device. Analogue multiplexers require a 3V~5V voltage to drain from a single voltage supply. A voltage higher than 1μA may cause damage to the switch multiplexer. Operating 8 inputs is required. It is possible to transfer data over a 400MHz-bandwidth. Don't miss this electronic component's additional features, such as: ALSO OPERATES WITH 5V NOMINAL SUPPLY.
ADG774ABRQZ-REEL7 Features
2 Channels Switch Circuit: SPDT 1nA Supply Current Bandwidth: 400MHz Additional Features: ALSO OPERATES WITH 5V NOMINAL SUPPLY
ADG774ABRQZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG774ABRQZ-REEL7 Analog Switches & Multiplexers ICs applications.