ADG824BCPZ-REEL7 Overview

Shipping overseas is convenient due to the electrical component's packing in 10-UFQFN, CSP. This packaging method provides high reliability because it uses advanced packaging techniques. There is an analog multiplexer mounted in position Surface Mount. Multiplexers and demultiplexers have the same number of circuits 2:1. Temperatures around -40°C~85°C TA are extended for operation. A total of 10 terminations have been recorded. A high-quality output is provided by the electrical component's 1 channels. An 1.8V voltage supply should allow the electrical part to be turned on and run. An injection of 10 pins is performed into the body of the electrical component. A SPDT switching circuit is used for these analog switches. Try searching with ADG824 if you're looking for variants. An switch multiplexer with 800mOhm internal resistance has a value of 800mOhm. Please refer to the datasheets for 10 pins functions. Multiplexer or Switches is a typical switch device. Users shouldn't supply more than 3.6V voltage to the switch device. There should be 1.65V voltage fed to the electrical part below 1.65V. This analog switch requires a voltage of 1.65V~3.6V to drain from a single voltage supply. Put voltage above 500mA on the multiplexer to cause damage. The electrical component supports 2 inputs. Drain to Source resistance is 800mOhm. This digital multiplexer has 4 outputs.

ADG824BCPZ-REEL7 Features

1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 90MHz
Drain-to-Source resistance: 800mOhm

ADG824BCPZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADG824BCPZ-REEL7 Analog Switches & Multiplexers ICs applications.

• HDTV
• PDAs
• Automotive applications
• Relay Replacement
• SONET/SDH ADM
• Audio and video switching
• 65 V DACs
• Modems
• Access Concentrators
• Data Acquisition Systems