ADM1069ASTZ-REEL7 Overview

There are 32 mounting terminals on the voltage supervisor, each of which has a different function. There is a Tape & Reel (TR)-packaging method applied to IC management. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 8 channels. To assist you, this PMIC includes 32-LQFP functions. This IC power shares lots of benefits with other Sequencer products. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 4.75V. A supply voltage of 8 is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 32 pins on the board. 32 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 3V volts. The supply voltage (Vsup) should not exceed 6V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Programmable. In order to maintain a stable supply current for the power management, 4.2mA is the recommended value. For similar manage ics search of the manufacturer, you can always refer to ADM1069, the base PMIC number. The power management must be powered by 4.75V volts to function properly. The maximum supply temperature that PMIC chip can work with is 6mA. A PMIC from the well-known Super Sequencer? series of products is being offered here.

ADM1069ASTZ-REEL7 Features

Sequencer type
Minimum supply voltage of 3V
4.2mA operating supply current

ADM1069ASTZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADM1069ASTZ-REEL7 Voltage Supervisors applications.

• Precision measurement
• Leakage protection
• Data storage applications
• Personal computers
• Insulation fault location system
• Detection of phase loss
• Digitally controlled LDO regulators circuit
• Battery cars
• Stable power system
• Urban rail transit weak current power monitoring