ADM1270ARQZ-R7 Overview
The 16-SSOP (0.154, 3.90mm Width) package includes it.In the current state, 1 channels are accessible.Cut Tape (CT)-shaped packaging is used.There are a total of 16 terminations on it.DUAL is the terminal position of the device.There are a total of 16 pins on it.High efficiency can be achieved by using 10V as supply voltage.In the way of Surface Mount, it's set up.This electrical component is classified as Hot Swap Controller.To ensure reliable operation, set the temperature to -40°C~125°C.General Purpose applications are available on the device.With a 4V~60VV power source, it should work.The number ADM1270 belongs to the ADM1270 family.Hot-swappable device is necessary to use 16 pins in order to operate the device.Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO is its programmable feature.Surface Mount is the direction in which it is positioned.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 4V in order to maintain normal operation.Hot-swappable device is set to 60V for the maximum supply voltage.360μA is the operative supply current.Hot Swap requires a maximum current of 500μA to operate.
ADM1270ARQZ-R7 Features
The terminal position of 16
Programmable features of Auto Retry, Circuit Breaker, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
ADM1270ARQZ-R7 Applications
There are a lot of Analog Devices Inc.
ADM1270ARQZ-R7 hot swap controllers applications.
- Network switches
-
- Networking
-
- Telecommunications
-
- Industrial
-
- Datacom
-
- Electric vehicle
-
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
