LED drivers benefit from this IC's enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.In the Tape & Reel (TR) package, this receiver is mounted.The Transceiver can transceiver type enables this part to be used in a wide range of applications.Any Surface Mount-type PCB or development board can be used with this wide receiver.Power supply for this differential driver is 4.75V~5.25V.There can be up to 1/1 eligible receivers/drivers on the field at the same time with this electronic part.This ic receiver has been primarily designed for applications where the operating temperature is -40°C~85°C.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.This wide receiver has 8 terminations for driving and receiving data signals.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.For more variants of this part, try searching with the base part number ADM1490, which indicates the product type, temperature, package, etc.An enhanced power dissipation control driver IC featuring 8 pins.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.It is important to note that this ic receiver had a maximum resolution of 1 bits.There is usually a 1-bit resolution specified for this receiver when it is used.There is a voltage input supply of 5V required for the operation of this integrated circuit.Driver ICs such as this one are designed to operate from 5V power sources.The module isolated transceiver implements a total of 1 transceivers.Using the input voltage of 1.2mA, this integrating circuit is capable of driving LEDs with an output voltage of 12 volts.Input currents exceeding 2mA may cause this can transceiver to malfunction.