ADM1811-10ART-REEL Overview

This power management consists of 3 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Surface Mount mounts IC management. A total of 3 pins are located on this power management. 3 pins make up the power management. Supply voltage (Vsup) should be at least 1V for this power management. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. Power management has an output of Open Drain or Open Collector during operation. The supervisor's supply current is specified to 16μA. A similar IC managements number of the manufacturer can always be found by using ADM1811, the base power ics number. The maximum supply temperature that PMIC chip can work with is 16μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.

ADM1811-10ART-REEL Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current

ADM1811-10ART-REEL Applications

There are a lot of Analog Devices Inc. ADM1811-10ART-REEL Voltage Supervisors applications.

• FPGA design
• DC stabilized power supply module
• Microcontroller system
• Power distribution systems of operating room
• Battery-powered equipment
• Radar
• Electronics installed in the vehicle
• Linux and server computing
• Digitally controlled LDO regulators circuit
• Smartphones