ADM1811-5AKS-REEL Overview

A total of 3 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-70, SOT-323 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 240. In a 5V supply voltage, the power management conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 70 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supervisor's supply current is specified to 16μA. A similar IC managements number of the manufacturer can always be found by using ADM1811, the base power ics number. The maximum supply temperature is 16μA. The power management monitors 1 inputs at once.

ADM1811-5AKS-REEL Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current

ADM1811-5AKS-REEL Applications

There are a lot of Analog Devices Inc. ADM1811-5AKS-REEL Voltage Supervisors applications.

• Important electronics for automotive protection
• Embedded computing
• DC stabilized power supply module
• Smartphones
• Sensitive sensors
• Utility meter
• Detection of phase sequence
• Set top box
• Battery cars
• DSP