ADM1817-10ARTZ-RL Overview
As you can see, this power management is mounted through 3 terminals. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 3 pins on the board. Power managment ic pin count is 3. It is recommended that Vsup should not be less than 1V for this IC power. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~105°C TA . When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 16μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by ADM1817. Voltage supervisor can work with a supply temperature of 16μA at the most. The power management monitors 1 inputs at once.
ADM1817-10ARTZ-RL Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
16μA operating supply current
ADM1817-10ARTZ-RL Applications
There are a lot of Analog Devices Inc. ADM1817-10ARTZ-RL Voltage Supervisors applications.
- Magnetic resonance imaging
- Power distribution systems of operating room
- Kitchen appliances
- Stable power system
- Power communication system
- WiFi router
- Automotive power systems
- Computer applications
- Detection of phase sequence
- Detection of phase imbalance