LED drivers benefit from this IC's enhanced 16-TSSOP (0.173, 4.40mm Width) package.In the Tape & Reel (TR) package, this receiver is mounted.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply requirements for this differential driver are 4.5V~5.5V.At any given time, there can be up to 2/2 eligible receivers/drivers for this electronic part.Applications with operating temperatures of -40°C~85°C have been designed primarily for this ic receiver.An operating voltage range of 5V is suitable for this line driver ic.There are 16 terminations in this wide receiver so that signals can be driven from the data and received.This transceiver is packaged with 16 market standard pinoutsFor more variants of this part, try searching with the base part number ADM202, which indicates the product type, temperature, package, etc.It is a 16-pin driver IC with enhanced power dissipation controls.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.Typically, the resolution of this receiver is specified to be 2 bits.There is a voltage supply of 5V required in order for this transceiver module to be operated.Line Driver or Receivers is a subcategory of this rf transceiver module.There is one driver IC in this package which is intended to be operated by 5V of power.It implements 1 transceivers in total.On the integrator circuit, there are 2 drivers embedded.It is capable of driving LEDs with a voltage of 6mA as the input voltage to this integrating circuit.A can transceiver that has a current input of 18mA or greater may be affected by malfunctions.