This driver chip is excellent for driving common LEDs due to its enhanced 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.In this package, the receiver is mounted in the Tape & Reel (TR) format.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.Any Surface Mount-type PCB or development board can be used with this wide receiver.With respect to the power supply, this differential driver uses 4.75V~5.25V.It is possible to have up to 1/1 receivers/drivers in use simultaneously with this electronic part.The operating temperature of this ic receiver is -40°C~85°C. It is primarily designed for applications with low temperatures.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.There are 8 terminations in this wide receiver so that signals can be driven from the data and received.ICs that are packaged with market standard pinouts are available on the market.For more variants of this part, try searching with the base part number ADM485, which indicates the product type, temperature, package, etc.Wide receiver with enhanced power dissipation control, 8-pin.Through optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size is reduced dramatically.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.This receiver is typically specified with a resolution of 1 bits. There are two types of input voltage supply available for this IC, 5V.This rf transceiver module can be grouped into a subcategory named Line Driver or Receivers.It is designed to be operated from a 5V power supply, so the module isolated transceiver will work effectively.In total, there are 1 transceivers implemented by this module isolated transceiver.With an input voltage of 2.2mA, this integrating circuit has the ability to drive LEDs with an output voltage of 2.2mA.In the case of input current exceeding 2.2mA, this can transceiver may malfunction.