Driver ICs with enhanced 28-SOIC (0.295, 7.50mm Width) packages are excellent for driving LEDs with common characteristics.The Tape & Reel (TR) package houses this receiver.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 3V~3.6V.As many as 4/5 receivers/drivers are eligible for use on this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.An output voltage range of 3.3V is sufficient to run this line driver ic efficiently.Wide receiver has 28 terminations built in for driving or receiving signals from data.In this package, you will find 28 market-standard pinouts for this transceiver.Since the part number ADM560 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It is a 28-pin driver IC with enhanced power dissipation controls.A dramatic reduction in package size is achieved through optical transceiver downsizing and high-density Surface Mount mounting technologies.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.An 8-pin power supply is provided by this driver IC, which allows it to operate from an 5V-pin power supply.The module isolated transceiver implements a total of 1 transceivers.The box contains 5 receivers.On the integrator circuit, there are 4 drivers embedded.It has the ability to drive LEDs with an input voltage of up to about 5mA with the help of this integrating circuit.In the event that the input current reaches or exceeds 5mA, the can transceiver may malfunction.