ADM6321AY30ARJZ-R7 Overview

It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. IC management conducts at a voltage of 3.3V. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain, Push-Pull. The power management's supply current is 20μA. You can always use ADM6321, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 20μA. In total, the voltage supervisor has 1 inputs which are monitored at the same time.

ADM6321AY30ARJZ-R7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
20μA operating supply current

ADM6321AY30ARJZ-R7 Applications

There are a lot of Analog Devices Inc. ADM6321AY30ARJZ-R7 Voltage Supervisors applications.

• Telecommunications equipment
• External alarm
• Automotive permanent magnet synchronous motors
• Medical-specific insulation monitor
• Microcontroller system
• FPGA design
• Embedded computing
• Data storage applications
• emergency room
• Display equipment