ADM6339NARJZ-RL7 Overview

Power management is mounted through 6 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. For your reference, this IC power includes a list of 1 functions. Power management consists of 4 channels, each of which can be used independently. In this IC management you will find SOT-23-6 functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. There is a specification for the peak reflow temperature of the package to be 260. A supply voltage of 1.8V is used to conduct the PMIC chip. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. It has a total of 6 pins that are attached to IC management. Power managment ic pin count is 6. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 55μA volt supply current. A similar IC managements number of the manufacturer can always be found by using ADM6339, the base power ics number. There are a total of 4 monitored inputs on the power management.

ADM6339NARJZ-RL7 Features

Multi-Voltage Supervisor type
Minimum supply voltage of 1V
55μA operating supply current

ADM6339NARJZ-RL7 Applications

There are a lot of Analog Devices Inc. ADM6339NARJZ-RL7 Voltage Supervisors applications.

• Urban rail transit weak current power monitoring
• Magnetic resonance imaging
• Sensitive sensors
• Battery cars
• Kitchen appliances
• Military electronics
• Computer applications
• Power distribution systems of infant care room
• Detection of phase sequence
• Transformer load monitoring equipment