ADM6348-34ARTZ-R7 Overview

There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes TO-236-3, SC-59, SOT-23-3 functions for your convenience. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 3V for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. 3 pins are present in total in this power management. The pins of the power management system count 3. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. In order to maintain a stable supply current for the power management, 500nA is the recommended value. A similar IC managements number of the manufacturer can always be found by using ADM6348, the base power ics number. On the power management, there are a total of 1 inputs that are monitored.

ADM6348-34ARTZ-R7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
500nA operating supply current

ADM6348-34ARTZ-R7 Applications

There are a lot of Analog Devices Inc. ADM6348-34ARTZ-R7 Voltage Supervisors applications.

• Insulation fault location system
• Sensitive sensors
• Dash board
• Power distribution systems of ICU
• Electronics installed in the vehicle
• Power distribution systems of CCU
• Battery cars
• FPGA design
• Smart meter
• Kitchen appliances