ADM6348-36ARTZ-R7 Overview

A total of 3 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3V volt supply. The mount is provided by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 3 pins on power management. The pins of the power management system count 3. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. There is a supply current of 500nA for the power management. A similar IC managements number of the manufacturer can always be found by using ADM6348, the base power ics number. On the power management, 1 inputs are monitored.

ADM6348-36ARTZ-R7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
500nA operating supply current

ADM6348-36ARTZ-R7 Applications

There are a lot of Analog Devices Inc. ADM6348-36ARTZ-R7 Voltage Supervisors applications.

• Electronics installed in the vehicle
• Detection of phase loss
• Smart meter
• Linux and server computing
• Sensitive sensors
• Utility meter
• Power distribution systems of infant care room
• DC stabilized power supply module
• emergency room
• Automotive power systems