ADM706PARZ-REEL Overview

This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. There are 8-SOIC (0.154, 3.90mm Width) functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. According to the specification, the package's peak reflow temperature is specified to be 260. In a 3V supply voltage, the power management conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. 8 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. You should set the supervisor's temperature during -40°C~85°C TA . As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 250μA. A similar IC managements number of the manufacturer can always be found by using ADM706, the base power ics number. To operate this power management, you will need at least 5V volts of power. The power management can work with a maximum supply temperature of 350μA. The power management monitors 1 inputs at once.

ADM706PARZ-REEL Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current

ADM706PARZ-REEL Applications

There are a lot of Analog Devices Inc. ADM706PARZ-REEL Voltage Supervisors applications.

• Smart meter
• Automotive permanent magnet synchronous motors
• Precision measurement
• DSP
• Unattended substation automation
• Radar
• Urban rail transit weak current power monitoring
• Fire equipment power monitoring system
• Detection of phase imbalance
• Insulation fault location system