ADM707ANZ Overview

It is mounted through 8 terminals on the power management. A Tube package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 2 channels, each of which can be used independently. There are 8-DIP (0.300, 7.62mm) functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 5V. By Through Hole, IC management has been mounted. A IC power such as this can be classified as a Power Management Circuits power management system. Power management has a total of 8 pins. This power management has 8 pins. It is recommended that Vsup should not be less than 1V for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Through HoleThe supervisors should be set to the following temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. It is estimated that the voltage supervisor's supply current is 250μA. To find similar IC managements from the manufacturer, you can always search by ADM707. There is a requirement for 5V power to power this power management. A maximum supply temperature of 250μA can be used. There are 1 inputs monitored at once on the power management.

ADM707ANZ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current

ADM707ANZ Applications

There are a lot of Analog Devices Inc. ADM707ANZ Voltage Supervisors applications.

• Fire equipment power monitoring system
• Important electronics for automotive protection
• Multi-voltage system
• Solar power charger
• Power distribution systems of infant care room
• Cloud computing
• Data storage applications
• Leakage current detection
• Power communication system
• Electronics installed in the vehicle