ADM708ARMZ-REEL Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. There are 2 channels on this power managment ic that can be found in a series. Please find attached 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. When a supply voltage of 5V is applied to the power ic, it conducts. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, the power management has 8 pins in it. This power management system has 8 pins. A voltage (Vsup) that doesn't fall below 1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Push-Pull during operation. It is estimated that the voltage supervisor's supply current is 250μA. To find similar IC managements from the manufacturer, you can always search by ADM708. The voltage supervisor requires a power source of 5V volts in order to work correctly. The power management can work with a maximum supply temperature of 250μA. It is possible to monitor 1 inputs at the same time on the power management as a whole.

ADM708ARMZ-REEL Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
250μA operating supply current

ADM708ARMZ-REEL Applications

There are a lot of Analog Devices Inc. ADM708ARMZ-REEL Voltage Supervisors applications.

• Unattended substation automation
• Urban rail transit weak current power monitoring
• Smart meter
• Low voltage/high power - AI, GPU
• Power distribution systems of operating room
• Leakage current detection
• emergency room
• Electronics installed in the vehicle
• Battery cars
• Battery cars