ADM709MAN Overview

There are 8 terminals connected to this power management, which makes it easy to mount. In terms of packaging, power management follows the Tube model. In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of 8-DIP (0.300, 7.62mm) functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. A supply voltage of 3V is used to conduct the PMIC chip. The mount is attached to Through Hole. This power ic can be sub-categorized as Power Management Circuits. A total of 8 pins are located on this power management. There are 8 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Through Hole mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. The power management's supply current is 200μA. If you want to search for similar IC managements of this manufacturer, you can always refer to ADM709, which is the base power ics number. In order to operate this power management, it requires 5V volts of power. At the most, voltage supervisor can work with a supply temperature of 200μA. The power management monitors 1 inputs at once.

ADM709MAN Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
200μA operating supply current

ADM709MAN Applications

There are a lot of Analog Devices Inc. ADM709MAN Voltage Supervisors applications.

• Display equipment
• WiFi router
• Network equipment
• emergency room
• Utility meter
• Power distribution systems of ICU
• Leakage current detection
• DSP
• Sensitive sensors
• Power communication system