ADM809-5LART-REEL Overview

Power management is mounted through 3 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 240. IC management conducts in a 3.3V-voltage supply. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 3 pins on the board. 3 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~150°C TA degrees. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. For this power management, there is an 60μA volt supply current. A similar IC managements number of the manufacturer can always be found by using ADM809, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. A maximum supply temperature of 60μA can be used with this power management. There are a total of 1 monitored inputs on the power management.

ADM809-5LART-REEL Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
60μA operating supply current

ADM809-5LART-REEL Applications

There are a lot of Analog Devices Inc. ADM809-5LART-REEL Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Multi-voltage system
• Automotive power systems
• Telecommunications equipment
• Medical-specific insulation monitor
• Leakage protection
• Network equipment
• Detection of phase sequence
• Digitally controlled LDO regulators circuit
• Display equipment