ADM811RARTZ-REEL7 Overview

There are 4 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. This power management is made up of 1 channels which are available in a series format. In this IC management you will find TO-253-4, TO-253AA functions for you to refer to. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 3V supply voltages. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, it has 4 pins on IC management. There are 4 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a 15μA supply current present in the power management. To find similar IC managements from the manufacturer, you can always search by ADM811. This power management requires 3V power to work. A maximum supply temperature of 10μA can be used with this power management. On the power management, there are a total of 1 inputs that are monitored.

ADM811RARTZ-REEL7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

ADM811RARTZ-REEL7 Applications

There are a lot of Analog Devices Inc. ADM811RARTZ-REEL7 Voltage Supervisors applications.

• Detection of phase sequence
• Household appliances
• Refrigeration
• Power distribution systems of ICU
• Important electronics for automotive protection
• Insulation fault location system
• Detection of phase imbalance
• Power distribution systems of CCU
• FPGA design
• Unattended substation automation