ADM812SART-REEL Overview

There are 4 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please refer to power management for TO-253-4, TO-253AA functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 240 for the package during reflow. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Power management has a total of 4 pins. This power management has 4 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1V. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. To find similar IC managements from the manufacturer, you can always search by ADM812. There is a requirement for 3.3V power to power this power management. The power management can work with a maximum supply temperature of 10μA. The power management monitors 1 inputs at once.

ADM812SART-REEL Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
15μA operating supply current

ADM812SART-REEL Applications

There are a lot of Analog Devices Inc. ADM812SART-REEL Voltage Supervisors applications.

• Medical-specific insulation monitor
• emergency room
• Dash board
• Power distribution systems of ICU
• Electronics installed in the vehicle
• Computer applications
• Stable power system
• Utility meter
• Battery-powered equipment
• Urban rail transit weak current power monitoring