ADM8611N263ACBZ-R7 Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. Power management is packaged in a Cut Tape (CT) way. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. There are 6-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 2V supply voltages. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. 6 pins are present in total in this power management. This power management has 6 pins. A voltage (Vsup) that doesn't fall below 900mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. The supervisor's supply current is specified to 20μA. A similar IC managements number of the manufacturer can always be found by using ADM8611, the base power ics number.

ADM8611N263ACBZ-R7 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
20μA operating supply current

ADM8611N263ACBZ-R7 Applications

There are a lot of Analog Devices Inc. ADM8611N263ACBZ-R7 Voltage Supervisors applications.

• Functional modules
• Leakage current detection
• WiFi router
• Radar
• FPGA design
• Digitally controlled LDO regulators circuit
• Medical-specific insulation monitor
• Computer applications
• DSP
• Important electronics for automotive protection