ADN2890ACPZ-RL Overview

There is a 16-WFQFN Exposed Pad, CSP case package that contains the instrumentation amplifiers. This is a Limiting type op amp. A Tape & Reel (TR) case is used to deliver the buffer op amp. The number of terminations is approaching the 16 mark. A total of 16 pins are attached to buffer op amp. Please take in mind that op amp should be run at 3.3V. To be specific, this instrumentation amplifier is a type of ATM/SONET/SDH ICs. It has 16 pins that make up the linear amplifier. With regards to the offset voltage of the input, buffer amplifier is rated at 100μV. This electrical part should be mounted using type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. An 39mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain at 57dB. One of the many benefits of this op amp ic is that it emits Differential signals. There is an operating supply voltage rating of 1 for this operational amplifier, which is rated at the manufacturer. The operating supply voltage of instrumentation amplifier is rated 3.3V voltage. In order for the op amp resistance to remain within the 50Ohm range, the op amp should be tested. Linear amplifiers using telecom IC types TELECOM CIRCUIT are used.

ADN2890ACPZ-RL Features

16 Pins
supply voltage of 3.3V
57dB voltage gain
Output Type: Differential
Resistance of 50Ohm

ADN2890ACPZ-RL Applications

There are a lot of Analog Devices Inc. ADN2890ACPZ-RL Instrumentational OP Amps applications.

• Comparator
• Addition operation circuits
• Video conversion and routing
• Logarithmic operation circuits
• Band-pass filter
• Automatic control
• Power transmission
• Weak signal detection
• RF cable systems
• Power control