ADP1822ARQZ-R7 Overview

The switching controller fits in the 24-SSOP (0.154, 3.90mm Width) package and is ideal for most applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. There are Transistor Driver dc switching's output (s) that it can handle. A 3.7V~5.5V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 310kHz 570kHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. There are a terminal (s) on the switching converters that are designed at DUAL. 24 terminations with various dc switching's functions. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics will be returned if you search "ADP1822". Total pins of switching converter are 24. Particularly, switching converter is a type of Switching Regulator or Controllers. A 4.675V voltage of DC regulator was detected in the test statistics. If you start a project, note down the dc dc regulator's usual output current of 20A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 1.2MHz frequency setting on the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 5V. During dormancy, the dc switching uses 1mA. The maximum input voltage of this dc switcher is 5.5V, so users must limit the voltage accordingly. A voltage of 3.7V must be present in the supply. A dc switcher can only produce an output current of 20A. A datasheet states that the switching converter can output 4.67V volts at its maximum. There is a 10μA volt supply current. Lowest voltage output of the voltage controller must be greater than 600mV. The nominal current supply of this the controllers dc is 2mA.

ADP1822ARQZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 310kHz 570kHz
Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 1.2MHz

ADP1822ARQZ-R7 Applications

There are a lot of Analog Devices Inc.
ADP1822ARQZ-R7 DC to DC converter applications.

• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools