ADP1823ACPZ-R7 Overview

Capsuled in the 32-WFQFN Exposed Pad, CSP package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. The system can process Transistor Driver dc switching's outputs (s). DC control operates at 3.7V~20V volts and has 3.7V~20V supply voltage. Work well in dc switchers with a -40°C~85°C TA. In this switching controller, the switch can be set to 300kHz 600kHz. dc dc regulators can be carried out with Surface Mount. Enable, Frequency Control, Power Good, Soft Start, Tracking is used for efficient switching control in the dcdc regulator. You can find other relevant dc to dc converter ics by searching "ADP1823". There are only 32 pins on switching converter. According to the test statistics, DC regulator outputs 17V voltage. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 90 %. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. A frequency of 1MHz is used by the switching controller. To operate the voltage regulator dc to dc safely and reliably, users should apply 20V. Keep dc regulator at a temperature of -40°C or above. The temperature should not exceed 85°C degrees Celsius. A dc switching in a dormant state uses 1mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 18V due to the dc switcher's maximum input voltage. A 32-LFCSP-WQ (5x5) would be the supplier dc dc controller package for this part. Voltage 3.7V is needed for the supply. Output current will not exceed 20A. Its datasheet indicates the switching converter can output a maximum of 15.3V volts. It runs on a 10μA supply current. The voltage controller's lowest voltage output is not less than 600mV. Phases of this controller are 2. The nominal current supply of this the controllers dc is 3mA.

ADP1823ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz 600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
Max Duty Cycle: 90 %
Frequency: 1MHz

ADP1823ACPZ-R7 Applications

There are a lot of Analog Devices Inc. ADP1823ACPZ-R7 DC to DC converter applications.

• Power supplies of electronic gadgets
• Hydraulic presses
• Drilling machines
• Window air conditioners
• Balance equipment
• Textile machinery
• Series voltage regulation circuits
• Serial communication converter
• Digital video recorders
• Flexible manufacturing cells