ADP1851ACPZ-R7 Overview

This switching controller fits most application requirements since it is packaged in a 16-WQFN Exposed Pad, CSP package. This dc motor controller can be used to generate outputs with 1 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. A 2.75V~20V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -40°C~125°C TJ rating. In this switching controller, the switch can be set to 200kHz~1.5MHz. It is suitable for general dc dc regulator when it is set to Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Frequency Control, Power Good, Ramp, Soft Start, Tracking. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at QUAD . The 16 terminations can be used for a wide range of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "ADP1851". 16 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. As determined by the test statistics, the output voltage of DC regulator is 18V. It's important to remember that the dc dc regulator's normaloutput current is 25A, so you should note it down when starting a new project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 90 %. DC switcher's Surface Mount qualifies it for most applications and prototypes. The dc switcher's maximum input voltage is 20V, so users must limit the voltage accordingly. There must be a 2.75V supply voltage. DC switcher will not be able to provide an output current above 30A volts. The switching converter can output 18V volts at its utmost, according to the datasheet. There is 4.2μA supply current for it. At least 600mV voltage is output by the voltage controller.

ADP1851ACPZ-R7 Features

Transistor Driver Outputs
Switching Frequency: 200kHz~1.5MHz
Current Limit, Enable, Frequency Control, Power Good, Ramp, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %

ADP1851ACPZ-R7 Applications

There are a lot of Analog Devices Inc. ADP1851ACPZ-R7 DC to DC converter applications.

• Motor controller circuits
• Scientific testing
• Program control systems
• Scientific research
• Electrical power transmission
• Handheld GPS
• Network technology
• Access control systems
• Pipe bending machines
• Planers