ADP1870ACPZ-0.6-R7 Overview

With its 10-VFDFN Exposed Pad, CSP package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 2.95V~20V and has a 2.95V~20V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . The 10 terminations can be used for a wide range of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Searching "ADP1870" will return other relevant dc to dc converter ics. 10 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. Based on the test statistics, DC regulator outputs voltage 600mV. If you are starting a new project, you should note the dc dc regulator's typical output current is 25A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 65 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. This value is MINIMUM OUTPUT VOLTAGE: 0.6V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 20V to ensure safety and reliability. In order to ensure the dc switcher's functionality, users must limit the voltage to 20V due to the dc switcher's maximum input voltage. In order to use a 2.95V voltage supply, switching controller is necessary to have one. Datasheets state the switching converter can output up to 18V volts. There is 140μA supply current for it. At least 600mV voltage is output by the voltage controller. The nominal supply current for this the controllers dc is 1.1mA.

ADP1870ACPZ-0.6-R7 Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 65 %
MINIMUM OUTPUT VOLTAGE: 0.6V

ADP1870ACPZ-0.6-R7 Applications

There are a lot of Analog Devices Inc.
ADP1870ACPZ-0.6-R7 DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots