ADP1883ARMZ-0.3-R7 Overview

This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. 1 outputs are supported by the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 2.75V~20V and has a 2.75V~20V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. It can switch at 300kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. DCDC regulator is controlled efficiently by Enable. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 10 of dc switching. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "ADP1883". Total pins of switching converter are 10. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 17V voltage according to the test statistics. You should note that the dc dc regulator's usual output current is 25A. The maximum duty cycle of this voltage regulator dc to dc is set to 84 % to ensure reliability during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. In order to satisfy the need, DC to DC voltage regulator has a value of MINIMUM OUTPUT VOLTAGE 0.8V. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 5.5V. In order to use a 2.75V voltage supply, switching controller is necessary to have one. Output current will not exceed 25A. A datasheet states that the switching converter can output 4.67V volts at its maximum. The supply current is 140μA. Neither the voltage controller's lowest voltage output 800mVr its highest voltage output is less than 800mV. nominal current supply for this the controllers dc is 70mA.

ADP1883ARMZ-0.3-R7 Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
MINIMUM OUTPUT VOLTAGE 0.8V

ADP1883ARMZ-0.3-R7 Applications

There are a lot of Analog Devices Inc. ADP1883ARMZ-0.3-R7 DC to DC converter applications.

• Sensitive electronic devices
• Linear guide
• Direct power supply system
• Flexible manufacturing cells
• Computer-related products
• Adjustable voltage or current linear circuits
• Smart grid
• Hydro power
• USB circuits
• Automatic plug-in machines