ADP195ACBZ-R7 Overview

It is package in Tape & Reel (TR) case.In the 4-UFBGA, WLCSP package, it is included.It has been mounted as Surface Mount on the LED driver.The switch type of this switch is General Purpose.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.A lighting driver with Slew Rate Controlled features is available.It comes under the family of ADP195.In total, there are 4 terminations.For operation, 4 pins are used.There are 1 functions of the LED driver.The maximum output current is reduced to 1.1A to meet the operation criteria.With a supply voltage of 1.8V, high efficiency is possible.The LED driving board is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.Currently, the LED driving board has 100mOhm resistance.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 3.6V.As far as input voltage goes, its maximum is 3.6V volts.There is a minimum input voltage of 1.1V volts.

ADP195ACBZ-R7 Features

Supplied from 1.8V
Resistance of 100mOhm

ADP195ACBZ-R7 Applications

There are a lot of Analog Devices Inc. ADP195ACBZ-R7 Power Switches ICs applications.

• Low Voltage I/O System Power
• Portable Devices
• Portable/Handheld Devices
• Storage (HDDs, SSDs)
• Portable GPS Device
• Solid-State Drives
• Various applications equipped with buttons
• USB Protection
• Portable GPS
• USB Power Distribution