ADTL082ARZ Overview

It is packaged in an 8-SOIC (0.154, 3.90mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a J-FET-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 5.5mV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~125°C. A supply current of 2.4mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106.02dB. There are a total of 2 channels available on the op amps. The quiescent current is 1.2mA.

ADTL082ARZ Features

8 Pins
supply voltage of 15V
106.02dB voltage gain

ADTL082ARZ Applications

There are a lot of Analog Devices Inc.
ADTL082ARZ Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering