ADXL362BCCZ-RL7 Description

An ultralow power, 3-axis MEMS accelerometer, the ADXL362 uses less than 2 nA in output data rate mode at 100 Hz and 270 nA in wake-up mode in response to motion. The ADXL362 does not alias input signals by undersampling; it samples the full bandwidth of the sensor at all data rates, in contrast to accelerometers that use power duty cycling to achieve low power usage. The ADXL362 offers 8-bit prepared data for more effective single-byte transfers when a lower output resolution is sufficient. The ADXL362 always offers 12-bit output resolution.

ADXL362BCCZ-RL7 Features

Power can be derived from coin cell battery

1.8 µA at 100 Hz ODR, 2.0 V supply

3.0 µA at 400 Hz ODR, 2.0 V supply

270 nA motion activated wake-up mode

10 nA standby current

High resolution: 1 mg/LSB

Built-in features for system-level power savings: Adjustable threshold sleep/wake modes for motion activation

Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely

Deep embedded FIFO minimizes host processor load

Awake state output enables implementation of standalone, motion activated switch

Low noise down to 175 µg/√Hz

Wide supply and I/O voltage ranges: 1.6 V to 3.5 V

Operates off 1.8 V to 3.3 V rails

Acceleration sample synchronization via external trigger

On-chip temperature sensor

SPI digital interface

Measurement ranges selectable via SPI command

Small and thin 3 mm × 3.25 mm × 1.06 mm package

ADXL362BCCZ-RL7 Applications

Hearing aids

Home healthcare devices

Motion enabled power save switches

Wireless sensors

Motion enabled metering devices