OP200EZ Overview
There is a 8-CDIP (0.300, 7.62mm) case in which the instrumentation amplifier is packaged. General Purpose-type instrumentation amplifiers are used in this application. In the case of Tube cases, linear amplifier will be delivered. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins. I would like to remind you that this buffer op amp should be powered by an 15V battery. It should be noted that this op amp is a type of Operational Amplifier device. A total of 8 pins are present on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 75μV. This electrical part should be mounted using type Through Hole. It is important to note that this linear amplifier works well at a temperature of -40°C~85°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 1.55mA . There should be no change in the voltage gain. 2 channels are available on the instrumentation amplifier. There is an 775μA quiescent current running through op amp ic.
OP200EZ Features
8 Pins
supply voltage of 15V
140dB voltage gain
OP200EZ Applications
There are a lot of Analog Devices Inc. OP200EZ Instrumentational OP Amps applications.
- Division circuits
- Navigation
- Large motor controllers
- Voltage regulation circuit
- Computer workstations
- Subtraction operation circuits
- Weak signal detection
- Switching amplifier
- Video data acquisition
- Fission chambers
