OP279GS-REEL7 Overview

In the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. This is a General Purpose type op amp. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The number of terminations is approaching the 8 mark. In this case, there are 8 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. An 8-pin op amp ic is included in the package. With regards to the offset voltage of the input, buffer amplifier is rated at 4mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~85°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 3.75mA and 10 . Keeping the voltage gain at 86.02dB is the best course of action. Buffer op amp is equipped with 2 channels on the device. One of its many advantages is that buffer op amp outputs Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 9V. It is used TAPE AND REEL to pack the op amps. Linear amplifier has a quiescent current of 3.5mA.

OP279GS-REEL7 Features

8 Pins
supply voltage of 5V
86.02dB voltage gain
Output Type: Rail-to-Rail

OP279GS-REEL7 Applications

There are a lot of Analog Devices Inc. OP279GS-REEL7 Instrumentational OP Amps applications.

• ECG equipment
• Mobile phone
• Information processing
• Voltage regulation circuit
• Signal filtering
• Power transmission
• Displayers for aircraft and air transportation control systems
• Differentiator circuits
• Vehicle electronics
• PDA