OP284FS-REEL7 Overview

Op amp is packaged in 8-SOIC (0.154, 3.90mm Width) case. The instrumentation amplifier in this picture is of the General Purpose-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. The number of terminations is approaching the 8 mark. Buffer amplifier has a total of 8 pins. It is important to remember that this op amp should be operated at a voltage of 15V volts. To be specific, this instrumentation amplifier is a type of Operational Amplifier. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. Surface Mount is the recommended mounting type of operational amplifiers. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. The buffer amplifier is capable of operating from a supply current of 4mA . There should be no change in the voltage gain at 107.6dB. On the buffer amps, there are 2 channels that can be used. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. There is an 2mA quiescent current running through op amp ic.

OP284FS-REEL7 Features

8 Pins
supply voltage of 15V
107.6dB voltage gain
Output Type: Rail-to-Rail

OP284FS-REEL7 Applications

There are a lot of Analog Devices Inc. OP284FS-REEL7 Instrumentational OP Amps applications.

• Proportional counter tubes
• High input resistance broadband
• Switching amplifier
• Laptop
• Comparator
• Video conversion and routing
• High/low-pass filter circuit
• Exponential operation circuits
• Power control
• Hand-held batteries