V62/11608-01XE Overview

Packed in SOT-23-8, the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -55°C~125°C TA. A total of 8 pins are injected into the body of the electronic part. SPDT switching circuits are used in these analog switch ics. Try searching for ADG619 variants of the analog switch ic. Analog switches have 6.5Ohm internal resistance. Datasheets for functions of 8 pins are available. It is generally not recommended to supply a voltage higher than 5.5V to the switch device in normal circumstances. A cost-effective Dual, Single supply type analogue multiplexer. 2.7V should be the lowest voltage fed to the electronic component. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. If you are using a dual power supply, you should attach at least 2.7V. Operating 1 inputs is required. The analogue multiplexer has 2 outputs.

V62/11608-01XE Features

Switch Circuit: SPDT
-3db Bandwidth: 190MHz

V62/11608-01XE Applications

There are a lot of Analog Devices Inc. V62/11608-01XE Analog Switches & Multiplexers ICs applications.

• HDTV
• T1/E1 Terminals
• Cross Connects
• Microwave transmission systems
• Channelized and Unchannelized DS3 applications
• Digital cross connects (DSX-1)
• USB 1.1 signal switching circuits
• Industrial and process control systems
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Wireless Local Loop