AD8322ARUZ Overview
In the package, you will find a TSSOP-case to contain the op amp ic. A Rail/Tube case is used for delivering the op amp. During the past two weeks, there have been close to 28 terminations. A total of 28 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 28 pins on it. It is recommended to keep the voltage gain at 43.2dB at all times. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of this instrumentation amplifier. The operating supply voltage of the buffer op amp is rated at 5V. This electric component can work from a voltage of under 5.25V as far as supply voltage is concerned. A voltage of 4.75V or higher is recommended for the linear amplifier's supply voltage. During testing, the buffer amplifier resistance should remain within a range of 235Ohm. A LINE DRIVER interface IC can be found on the electric part.
AD8322ARUZ Features
28 Pins
supply voltage of 5V
43.2dB voltage gain
Resistance of 235Ohm
AD8322ARUZ Applications
There are a lot of Analog Devices, Inc.
AD8322ARUZ Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
