AD8601DRT-R2 Overview
In the package, you will find a SOT-23-case to contain the op amp ic. The instrumentation amplifier in this picture is of the OPERATIONAL AMPLIFIER-type. A Tape and Reel case is used for delivering the op amp. During the past two weeks, there have been close to 5 terminations. A total of 5 pins are located on this board. This linear amplifier should be powered by an 3V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The op amp ic has an array of 5 pins on it. Op amp rates 6mV as input offset voltage. It is recommended to keep the voltage gain at 95.56dB at all times. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 125°C should not be used for the operation of this instrumentation amplifier. 1 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 5.5V as far as supply voltage is concerned. A voltage of 2.7V or higher is recommended for the linear amplifier's supply voltage.
AD8601DRT-R2 Features
5 Pins
supply voltage of 3V
95.56dB voltage gain
AD8601DRT-R2 Applications
There are a lot of Analog Devices, Inc.
AD8601DRT-R2 Instrumentational OP Amps applications.
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
- Video computer boards
