LT1789IS8-1#PBF Overview

In the package, you will find a SOIC-case to contain the op amp ic. The op amp ic has an array of 8 pins on it. Op amp rates 750μV as input offset voltage. Using an 85μA supply current, this operational amplifier ics can be operated. A instrumentation amplifier like this has 1 circuits. On the buffer amps, there are 1 channels that can be used. To operate this buffer amplifier, the temperature must not be lower than -40°C. A temperature greater than 85°C should not be used for the operation of buffer amplifier. 3 elements make up the design of this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 3V. This electric component can work from a voltage of under 36V as far as supply voltage is concerned. A voltage of 2.2V or higher is recommended for the linear amplifier's supply voltage. This electrical part should be conducted under the dual supply voltage of 18V volts when you conduct this part. During testing, the instrumentation amplifier resistance should remain within a range of 1.6GOhm. The buffer amplifier consists of 1 amplifiers.

LT1789IS8-1#PBF Features

Resistance of 1.6GOhm

LT1789IS8-1#PBF Applications

There are a lot of Analog Devices, Inc.
LT1789IS8-1#PBF Instrumentational OP Amps applications.

• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering
• Signal operation
• Video computer boards