LT1806IS8#TRPBF Overview

It is packaged in an SOIC-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel (TR) case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 550μV for input offset voltage. A supply current of 11mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 106.85dB. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 12.6V, which is suitable. Keeping the linear amplifier's supply voltage above 2.5V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 6.3V volts.

LT1806IS8#TRPBF Features

8 Pins
supply voltage of 5V
106.85dB voltage gain

LT1806IS8#TRPBF Applications

There are a lot of Analog Devices, Inc.
LT1806IS8#TRPBF Instrumentational OP Amps applications.

• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection
• Signal amplification
• Signal filtering