LT1999CS8-10#TRPBF Overview

Packaged in a SOIC case, the buffer op amp is ready to use. The op amp is delivered to you in a Tape & Reel (TR) case. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 500μV for this buffer op amp. As long as the supply current of the chip does not exceed 5.8mA, this op amp ic can operate. 20.04dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of 0°C degrees Celsius. No temperature greater than 70°C should be used. The linear amplifier consists of 2 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5.5V. A high supply voltage of more than 4.5V is recommended for the instrumentation amplifier's supply voltage. Instrumentation amplifier resistance should stay within the range of 20MOhm.

LT1999CS8-10#TRPBF Features

20.04dB voltage gain
Resistance of 20MOhm

LT1999CS8-10#TRPBF Applications

There are a lot of Analog Devices, Inc.
LT1999CS8-10#TRPBF Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection