LT1999MPS8-50#TRPBF Overview

In the package, you will find a MSOP-case to contain the op amp ic. There is a Tape & Reel (TR) case that is delivered with the instrumentation amplifiers. The op amp ic has an array of 8 pins on it. Op amp ic rates 500μV for input offset voltage. Using an 5.8mA supply current, this operational amplifier ics can be operated. 34.02dB should be the voltage gain. In total, there are 1 circuits on this buffer amplifier. Op amp ic has 1 channels. Using this buffer op amp requires a temperature of at least -55°C. You should only use instrumentation amplifier at temperatures that are no higher than 150°C. A total of 2 elements are present in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 5V. With regard tp supply voltage, op amp is used under 5.5V. It is advised to keep the op amp's supply voltage higher than 4.5V. Instrumentation amplifier resistance should remain within the range of 20MOhm.

LT1999MPS8-50#TRPBF Features

34.02dB voltage gain
Resistance of 20MOhm

LT1999MPS8-50#TRPBF Applications

There are a lot of Analog Devices, Inc. LT1999MPS8-50#TRPBF Instrumentational OP Amps applications.

• Fast A/D and D/A converters
• Proportional counter tubes
• Inverse/same-phase proportional circuit
• Band-stop filter
• Mobile phone
• Test equipment
• Micro signal measurement
• Logarithmic operation circuits
• Semiconductor detectors
• Portable electronic products powered by batteries