LTC1992-1HMS8 Overview
There is a MSOP case package that contains the instrumentation amplifiers. 8 pins are located on the operational amplifiers. The input offset voltage is 250μV. The buffer amplifier is capable of operating from a supply current of 700μA . It is recommended to keep the voltage gain at 80dB at all times. This op amp contains 1 circuits. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 125°C. The total number of elements in this buffer amplifier is 1. Under 12V is the minimum supply voltage for this electric component. Over 2.4V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 5.5V. In order for the op amp resistance to remain within the 38kOhm range, the op amp should be tested.
LTC1992-1HMS8 Features
80dB voltage gain
Resistance of 38kOhm
LTC1992-1HMS8 Applications
There are a lot of Analog Devices, Inc.
LTC1992-1HMS8 Instrumentational OP Amps applications.
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
- Signal operation
