LTC1992-1IMS8 Overview
It is packaged in an MSOP-case that protects the operational amplifiers from damage. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 250μV for input offset voltage. A supply current of 700μA can be used to operate this linear amplifier. There should be no change in the voltage gain at 80dB. This op amp ic has 1 circuits. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 1 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 12V, which is suitable. Keeping the linear amplifier's supply voltage above 2.4V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 5.5V volts. It is important that the op amp resistance stays within the range of 37.5kOhm.
LTC1992-1IMS8 Features
80dB voltage gain
Resistance of 37.5kOhm
LTC1992-1IMS8 Applications
There are a lot of Analog Devices, Inc.
LTC1992-1IMS8 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
