LTC6416IDDB#TRMPBF Overview

A DFN EP case is used to package the op amp. There are 10 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 500μV. An 42mA volt supply current is needed for this linear amplifier to operate. On this instrumentation amplifier, there are 1 circuits that are connected together. There are 1 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 1 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 3V. I would like to point out that this electrical component is capable of working from a voltage below 3.9V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 2.7V at all times. 15kOhm should be the range of resistance for the linear amplifier.

LTC6416IDDB#TRMPBF Features

Resistance of 15kOhm

LTC6416IDDB#TRMPBF Applications

There are a lot of Analog Devices, Inc.
LTC6416IDDB#TRMPBF Instrumentational OP Amps applications.

• Addition operation circuits
• Subtraction operation circuits
• single/dual op amp sum and difference circuits
• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement