LTC6417IUDC#PBF Overview

Packaged in a QFN case, the buffer op amp is ready to use. A total of 20 pins are present on the instrumentation amplifier. There is an input offset voltage of 100μV for this buffer op amp. As long as the supply current of the chip does not exceed 123mA, this op amp ic can operate. 0dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 105°C should be used. The linear amplifier consists of 1 different elements in total. The operating supply voltage of the buffer op amp is rated at 5V. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 5.25V. A high supply voltage of more than 4.75V is recommended for the instrumentation amplifier's supply voltage. A total of 1 instrumentation amplifiers are present on the device.

LTC6417IUDC#PBF Features

0dB voltage gain

LTC6417IUDC#PBF Applications

There are a lot of Analog Devices, Inc.
LTC6417IUDC#PBF Instrumentational OP Amps applications.

• Integrator circuits
• Differentiator circuits
• Logarithmic operation circuits
• Exponential operation circuits
• Multiplication circuits
• Division circuits
• Precision measurement
• Power control
• Information processing
• Weak signal detection